Hunting for a way to jazz up your wall artwork? Consider earning your possess Do-it-yourself acrylic frames for individualized 3D artwork. This post will wander you via accurately how I manufactured these in my dwelling.
If you are hunting for a custom way to body your photos or artwork to make it stand out from the wall, these Do it yourself acrylic frames are the ideal detail.
I landed on these frames simply because I essential a very little one thing to include a little added pizzazz to my lavatory wall. 
We resolved to include my spouse&rsquos appreciate of golfing into the mix by printing photos he took of PGA golfing classes he&rsquos played in black and white.
I enjoy when artwork is a discussion piece, so this was the best addition to the bathroom wall.
To make it really stand out, I created these Diy acrylic frames for each and every of the pics.
Right here are the measures I took&hellip 
Table OF CONTENTS
- 1. Assemble your materials.
- 2. Tape every aspect of just about every corner.
- three. Mark exactly where you want to drill your holes.
- four. Drill your holes.
- five. Use your glue dots to safe your photographs to the frame.
- 6. Mark the whole on the wall exactly where you program to hang it.
- seven. Use have a peek at these guys to mark the entire on the wall.
- 8. Drill your holes in the wall.
- nine. Screw the standoffs into the wall.
- 10. Connect your frame to the standoffs.
- eleven. Revel in the finished solution!
Disclaimer: This publish does consist of affiliate inbound links for your comfort. This is at NO more cost to you but earns me a compact fee. To examine far more, check out out our disclosure coverage.
one. Get YOUR Supplies.
Initial matters to start with, collect all your supplies. All resources for everything I made use of are linked beneath. I also bundled a record with hyperlinks of what we made use of to hold the frames, way too. 
FOR Making THE Do it yourself ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (1 for the size of the opening of your standoffs and one for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Software (I utilized a Sharpie)
FOR HANGING THE Diy ACRYLIC FRAMES:
- Pencil
- Handheld Degree
- Punch
- Screwdriver
two. TAPE Just about every Side OF Each and every CORNER.
Plexiglass/acrylic is incredibly delicate.
Mainly because of this, you have to be very cautious when you are drilling the holes.
Putting a piece of painter&rsquos tape on either side in which you prepare to drill your gap will help keep the acrylic sheet from breaking or cracking when you drill.
I also stored the protecting include on just about every side of the piece, way too.
3. MARK The place YOU WANT TO DRILL YOUR HOLES.
Once you have put the painter&rsquos tape on all 4 sides (or nevertheless many areas you system to drill a gap), you can spot a mark of exactly where you want to drill your gap.
I drilled my holes 1&Prime in from each edge as you can see from the photograph previously mentioned.
four. DRILL YOUR HOLES.
Prior to in fact drilling, double and triple look at that your marks are stage both of those horizontally and vertically.
You&rsquoll want to have these amount for when you dangle them. 
The drill bit you pick out should really be massive sufficient to permit the standoff to in shape inside of the gap.
I would do a check operate on a piece of scrap product to make sure it is massive enough. 
When you are sure that the marking are amount and the bit is large more than enough, you want to begin drilling.
Right here is a fantastic video to observe if you would like a demonstration on how to drill by acrylic.
You want to use about 50 percent electricity when you are drilling.
Gradual and regular. If you go to quickly, the acrylic will crack, so just take your time.
As you drill you really should see spirals of the acrylic gradually currently being eliminated. 
Repeat the drilling for just about every gap you have to have.
five. USE YOUR GLUE DOTS TO Protected YOUR Pics TO THE Frame.
The moment your holes are made, you can insert your photograph to the piece of acrylic/body.
The vital in this article is to once more, make confident your photograph is stage ahead of you fully safe it to the body.
The glue dots are very sticky and don&rsquot allow for a ton of wiggle space, so it may possibly be a fantastic idea to line up a piece of lined paper powering the body to assist you line the edges of your image.
Whatsoever trick is effective for you to make certain the photo gets glued to the frame amount will do. 
six. MARK THE Whole ON THE WALL Wherever YOU System TO Dangle IT.
As you commence to cling, mark your holes on the wall, but make positive your body is stage.
If you calculated appropriately in the phase right before drilling, the holes on your body should presently be level.
If you are hanging additional than 1 body like I did, make confident each and every body is degree in your grid, much too. 
seven. USE YOUR PUNCH Tool TO MARK THE Full ON THE WALL.
I like this device so substantially due to the fact it gets your hole begun and permits your drill to keep in spot when you begin drilling.
If you don&rsquot have a person, I extremely propose it!
eight. DRILL YOUR HOLES IN THE WALL.
Be sure to use a bit that matches the screws that arrived together with your standoffs.
This will most most likely be a smaller bit than the just one you made use of on the frames.
I also utilized a stud finder to see if I essential drywall anchors, but since these frames are not that heavy, you could most likely do with out them.
9. SCREW THE STANDOFFS INTO THE WALL.
As soon as you buy your standoffs, you&rsquoll see how they operate.
In buy for the photograph to &ldquostand off&rdquo the wall, you have to secure the standoff with the presented screw in advance of attaching the photo to the standoffs.
As you can see from the photograph, building positive all the things is amount and measured accurately is super critical. 
10. Connect YOUR Frame TO THE STANDOFFS.
When you&rsquove connected the standoffs, it&rsquos time to attach the pics!
Line up the standoffs with your drilled holes and protected the standoffs.
If all goes nicely, every little thing will line up properly and be all set to go!
If you are like my father and I, you&rsquoll arrive across at least just one that doesn&rsquot line up properly.
For this, we cheated a small little bit and secured the standoff to the frame and utilized a glue dot to secure it to the wall, so it didn&rsquot shift.
We only had to do this for two corners of two frames, but don&rsquot fear if you mess up just one&hellip We&rsquove been there! 
eleven. REVEL IN THE Finished Product!
Now it&rsquos time to delight in your perform!
We did a grid of nine total pictures which was a major undertaking with all the measuring, but I&rsquom in love with how it turned out.
Permit me know in the comments what you consider of the concluded solution!
EN 
AR